Product Description
Room use no noise frequency conversion air compressor (TKLYC-11F)
Advantages of twin rotor/screw air end:
1. Adopt the most advanced technical speed regulating electric motor-permanent magnetic motor, efficiency can be up to 97%, higher by 3%-4% than common frequency conversion device and motors type, saving energy obviously.
2. Permanent magnetic motor and the twin rotor/ screw compression air end adopt embedded integrated direct-connecting structure, without coupling part or transmission gear, ensure 100% transmission efficiency.
3. Permanent magnetic electric motor is without motor bearing or sleeve, so no need lubricating grease, no concern alignment problem, compact structure, convenient use and maintenance.
4. The whole machine work in frequency conversion state, and can operate frequency modulation according to the client’s actual requirement of air consumption, realizing high efficiency and energy saving.
5. Machine starting on frequency conversion state, greatly reducing the impact to the power grid equipment, avoiding of damage to the electric equipment, and saving electric energy when starting.
6. No need to set working pressure up and bottom limit value, can operate by regulating the frequency at the setting pressure point to stabilize the pressure, so can save electric energy by 10%-15%.
7. Compared with the fixed speed compressor, our compressor can save energy by 30%; compared with the common frequency compressor, our compressor can save energy by 5%-10%.
Advantages of the whole air compressor unit:
1. Approved by ISO9001certificate, SGS, CE and etc..
2. Adopt world famous brand of twin-screw main machine, high efficiency, reliable and long use life.
3. Adopt world famous brand of air intake filter, oil filter, air and oil separator, realize high filtration accuracy, compressed air oil content under 3ppm, reach to international advanced standard level.
4. Equip with the most advanced air control system. Adopt air intake valve, intelligent control system and pressure sensor combined control method, can operate by ON and OFF 2 point, stepless air capacity control system, time-delay stop and automatically start device 3 air capacity control method, can meet different clients demand.
5. Intelligent microcomputer control system, Chinese and English language operation interface, malfunction display, alarm and machine stop automatically.
6. Adopt high quality and world famous brand of main components, like UK APD oil filter, America AMOT temperature controlling valve, SCHNEIDER electric parts and etc., high efficiency, reliable and long use life.
Technical parameter of CHINAMFG air compressor:
| Model | Exhause pressure (Mpa) | Air displacemen (m3/min) | Power (Kw) | Noise (dBa) | Dimensions (mm) | Outlet pipe size | Weight (Kg) |
| TKLYC-7F | 0.7/0.8/1.0 | 1.23/1.16/1.02 | 7.5 | 65±3 | 840*670*925 | G3/4 | 350 |
| TKLYC-11F | 0.7/0.8/1.0 | 1.65/1.62/1.4 | 7.5 | 65±3 | 1000*820*1145 | G3/4 | 390 |
| TKLYC-15F | 0.7/0.8/1.0 | 2.65/2.24/2.1 | 15 | 65±3 | 1300*850*1257 | G1 | 410 |
| TKLYC-18F | 0.7/0.8/1.0 | 3.1/3.0/2.7 | 18.5 | 65±3 | 1300*850*1257 | G1 | 440 |
| TKLYC-22F | 0.7/0.8/1.0 | 3.8/3.7/3.3 | 22 | 65±3 | 1300*850*1258 | G1 | 650 |
| TKLYC-30F | 0.7/0.8/1.0 | 5.3/5.1/4.5 | 30 | 68±3 | 1600*1100*1430 | G1 1/2 | 800 |
| TKLYC-37F | 0.7/0.8/1.0 | 6.7/6.5/5.7 | 37 | 68±3 | 1600*1100*1430 | G1 1/2 | 850 |
| TKLYC-45F | 0.7/0.8/1.0 | 8.6/8.0/7.1 | 45 | 68±3 | 1600*1100*1430 | G1 1/2 | 900 |
| TKLYC-55F | 0.7/0.8/1.0 | 10.3/10.1/9.3 | 55 | 72±3 | 1750*1150*1500 | DN50 | 1650 |
| TKLYC-75F | 0.7/0.8/1.0 | 14.0/13.5/12.5 | 75 | 72±3 | 1750*1150*1500 | DN50 | 1800 |
| TKLYC-90F | 0.7/0.8/1.0 | 17.2/15.9/14.0 | 90 | 72±3 | 2000*1150*1680 | DN50 | 1950 |
| TKLYC-110F | 0.7/0.8/1.0 | 21.4/19.9/18.1 | 110 | 73±3 | 2300*1540*1900 | DN80 | 2500 |
| TKLYC-132F | 0.7/0.8/1.0 | 24.6/23.8/22.1 | 132 | 73±3 | 2300*1540*1900 | DN80 | 2600 |
| TKLYC-160F | 0.7/0.8/1.0 | 28.7/27.1/25.2 | 160 | 75±3 | 2900*1540*2120 | DN80 | 3600 |
| TKLYC-185F | 0.7/0.8/1.0 | 33.5/30.5/27.0 | 185 | 76±3 | 3100*1940*2389 | DN80 | 4200 |
| TKLYC-200F | 0.7/0.8/1.0 | 36.5/33.5/30.6 | 200 | 78±3 | 3100*1940*2389 | DN100 | 4400 |
| TKLYC-250F | 0.7/0.8/1.0 | 45.3/43.0/38.1 | 250 | 78±3 | 3400*2050*2330 | DN100 | 4900 |
Our factory and workshop:
After sales service:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw main machine is 1 year, the bearing is 1 year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.
Certification and patents of our air compressor
FAQ:
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Type: | Twin-Screw Compressor |
| Customization: |
Available
|
|
|---|
.webp)
How are air compressors utilized in pharmaceutical manufacturing?
Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:
1. Manufacturing Processes:
Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.
2. Instrumentation and Control Systems:
Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.
3. Packaging and Filling:
Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.
4. Cleanroom Environments:
Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.
5. Laboratory Applications:
In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.
6. HVAC Systems:
Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.
By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.
.webp)
What is the energy efficiency of modern air compressors?
The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:
Variable Speed Drive (VSD) Technology:
Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.
Air Leakage Reduction:
Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.
Efficient Motor Design:
The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.
Optimized Control Systems:
Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.
Air Storage and Distribution:
Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.
Energy Management and Monitoring:
Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.
It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.
Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.
.webp)
What is the purpose of an air compressor?
An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:
1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.
2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.
3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.
4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.
5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.
6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.
Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.
editor by CX 2023-10-17
China wholesaler Industrial Screw Oil Free Portable Water Lubrication Oil-Less Machines Industrial Equipment 40 Bar Rotary Electric Head Sale Rotary Air Compressor manufacturer
Product Description
Screw Air Compressor Oil free portable water lubrication oil-less machines industrial equipment 40 bar rotary electric head sale rotary permanent replacement
Main uses and guarantees:
Energy saving: energy saving more than 15% compared with dry oil-free compressor.
Environment protection: no using any lubricate oil to avoid environment pollution.
Reliability: absolutely guarantee oil-free.
Because the purified water takes part into the compressing process to seal, cool and lubricate, it increases efficiency. With the same motor power, comparing with dry oil-free air compress, there is 15% more air production of oil-free screw air compressor of water lubrication, it reduces the energy consumption greatly. The consumption material of oil-free screw air compressor is only water, air filter and water filter, the maintenance cost is very low.
100% oil-free compressed air, 100% purified compressed air, 100% no oil pollution risk.
In the process of food and drink industry, medical industry, packing industry, electronic manufacture, painting industry, powder coating industry and textile manufacturing, it must avoid any risk of oil pollution, otherwise it would cause serious consequences such as manufacture damages and stop, brand and credit losing. CMN oil-free screw air compressor takes water for lubrication, there is not any lubricate oil in the air end, and at the meantime, because the purified water clean the air, the compressor air is absolutely clear and not any pollution.
Guarantee: High precision, high wear resistance, low noise, smooth and steady, high strength
Our OEM/ODM company provides you what best matches your needs
Our product can be adapted. Please give us the required model name so we can provide you the most accurate quotation.
This chart if for reference, if you need different features, provide us all relevant details for your project and we will be glad to help you finding the product matching your need at the best quality with the lowest price.
Please note the price and the MOQ may vary regarding the product you chose: do not hesitate to contact us to know more!
|
SPECIFICATIONS FOR 25 TON CRAWLER EXCAVATOR |
|||
|
Engine |
Engine model |
Kw/rpm |
135.5/2150 |
|
No. of cylinders |
Kw/rpm |
637/1800 |
|
|
Net Power |
L |
6.494 |
|
|
Main performance parameters |
Main performance parameters |
km/h |
5.9/4.0 |
|
Travel speed (max. & min.) |
° |
<=35 |
|
|
Max. Gradeability |
rpm |
11.3 |
|
|
Hydraulic system |
Hydraulic system |
KPa |
50.1 |
|
Main pump |
KN |
161 |
|
|
Rate flow |
KN |
125 |
|
Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
company information
| After-sales Service: | Installation Guide |
|---|---|
| Warranty: | 6 Years |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | DC Power |
| Cylinder Position: | Vertical |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
How are air compressors utilized in pharmaceutical manufacturing?
Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:
1. Manufacturing Processes:
Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.
2. Instrumentation and Control Systems:
Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.
3. Packaging and Filling:
Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.
4. Cleanroom Environments:
Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.
5. Laboratory Applications:
In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.
6. HVAC Systems:
Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.
By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.
.webp)
Can air compressors be integrated into automated systems?
Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:
Pneumatic Automation:
Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.
Control and Regulation:
In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.
Sequential Operations:
Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.
Energy Efficiency:
Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.
Monitoring and Diagnostics:
Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.
When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.
In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.
What is the impact of tank size on air compressor performance?
The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:
1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.
2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.
3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.
4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.
5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.
It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.
Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.
editor by CX 2023-10-08
China manufacturer 2021 Hot Sale Industrial Heavy Duty 55cfm to 1600 Cfm Mining Drilling Portable Mobile Movable Diesel Engine Screw Type Rotary Mine Air Compressor air compressor lowes
Product Description
| Model | MDS390S-8 | |||||||||
| Compressor | brand | |||||||||
| Air delivery |
m3/min | 11 | ||||||||
| cu.ft/min | 390.0 | |||||||||
| Discharge pressure | bar | 8 | ||||||||
| psig | 116 | |||||||||
| Lubricating Oil capacity | L | 98 | ||||||||
| Diesel Engine |
Manufacture&Model | 4BTA3.9-C125 | ||||||||
| Cylinder Number | 4 | |||||||||
| Displacement(L) | 3.9 | |||||||||
| Rotation speed(Rmp) | Operating | 2100 | ||||||||
| Idle speed(r/min) | 1500 | |||||||||
| Rated power(KW) | 93 | |||||||||
| Lubricating Oil capacity(L) | 9 | |||||||||
| Coolant Capacity(L) | 20 | |||||||||
| Battery | 6-QW-80 | |||||||||
| Feature&Benefit | ||||||||||
| Feature | Benefit | |||||||||
| Pressure selection and control | Easy pressure setting | |||||||||
| Flow selection and control | The working pressure and airflow rate can be adjusted according to the size of air consumption without wasting any diesel | |||||||||
| The twin-screw rotor is directly connected with the diesel engine by a highly flexible coupling | Outputting more air with less energy consumption, featuring high reliability, longer service life, and low maintenance cost. | |||||||||
| The two-stage air filtration system | The total efficiency of air filtration reaches 99.8% ensuring the compressor to not be infringed by dust and dirt particles and longer service life of the engine | |||||||||
| High-temperature resistance design | Able to run for a long time under extreme cold or hot temperature from -20ºC to 50ºC | |||||||||
| One-button start, clear operational parameters | Operators don’t have to go through long-term professional training, and unattended operations can be achieved. | |||||||||
| Application areas | ||||||||||
| Field | Application | Nominal Working Pressure(bar) | Free Air Delivery Range(m3/min) | |||||||
| General Construction (building sites, road maintenance, bridges, tunnels, concrete pumping and shotcreting) |
Hand-held pneumatic breakers | 7~14 | 5~13 | |||||||
| Jack hammers | ||||||||||
| Air guns | ||||||||||
| Shotcrete equipment | ||||||||||
| Pneumatic wrenches | ||||||||||
| Nut runners | ||||||||||
| Ground Engineering Drilling (basement and foundation excavation for apartment blocks and other buildings) |
Pneumatic rock drills | 7~17 | 12~28 | |||||||
| Block cutters | ||||||||||
| Dewatering pumps. | ||||||||||
| Hand-held pneumatic breakers | ||||||||||
| Utility, CHINAMFG Blasting (shipyards, steel construction and large renovation jobs) |
Sandblasting (remove rust, scale, paint) |
7~10 | 10~22 | |||||||
| Blast Hole Drilling (aggregate production for construction stabilization, cement production in limestone quarries and open pit mining) |
Rock drills | 14~21 | 12~29 | |||||||
| Dewatering pumps | ||||||||||
| Hand-held breakers | ||||||||||
| High Pressure Drilling (drilling for water wells and foundations for high-rise buildings, along with geotechnical/geothermal applications) |
Water well drilling | 20~35 | 18~40 | |||||||
| Selection table |
| Small Series | |||||||||||
| Small Series | FAD | Pressure | Engine model | Dimensional Date(mm) | |||||||
| m3/min | cfm | Bar | psig | length | width | height | weight(kg) | ||||
| model | with tow bar | without tow bar | |||||||||
| MDS55S-7 | 1.55 | 55 | 7 | 101.5 | D902 | 2925 | 1650 | 1200 | 1200 | 600 | |
| MDS80S-7 | 2.24 | 80 | 7 | 101.5 | D1005 | 2925 | 1650 | 1200 | 1200 | 630 | |
| MDS100S-7 | 2.8 | 100 | 7 | 101.5 | V1505 | 2925 | 1650 | 1200 | 1200 | 640 | |
| MDS125S-7 | 3.5 | 125 | 7 | 101.5 | V1505 | 3065 | 1800 | 1500 | 1350 | 810 | |
| MDS130S-8 | 3.7 | 132 | 8 | 116 | JE493 | 3065 | 1800 | 1500 | 1350 | 810 | |
| MDS185S-7 | 5.18 | 185 | 7 | 101.5 | JE493 | 3200 | 1900 | 1740 | 1660 | 950 | |
| MDS185S-10 | 5.18 | 185 | 10 | 145 | JE493 | 3050 | 1900 | 1740 | 1660 | 950 | |
| Middle Series (Low&Medium pressure) | |||||||||||
| Middle Series (Low&Medium pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | |||||||
| m3/min | cfm | Bar | psig | length | width | height | weight(kg) | ||||
| model | with tow bar | without tow bar | |||||||||
| MDS265S-7 | 7.42 | 265 | 7 | 101.5 | JE493 | 3629 | 2200 | 1700 | 1470 | 1200 | |
| MDS300S-14 | 8.4 | 300 | 14 | 203 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 | |
| MDS350S-10 | 9.9 | 354 | 10 | 145 | 4BT3.9 | 3850 | 2600 | 1810 | 2378 | 1800 | |
| MDS390S-7 | 11 | 393 | 7 | 101.5 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 | |
| MDS390S-13 | 11 | 393 | 13 | 188.5 | QSB4.5 | 3850 | 3100 | 1810 | 2378 | 1980 | |
| MDS429S-7 | 12 | 429 | 7 | 101.5 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 | |
| MDS429S-14 | 12 | 429 | 14 | 203 | QSB4.5 | 3850 | 3100 | 1810 | 2378 | 1980 | |
| MDS500S-14 | 14.1 | 504 | 14 | 203 | 6BTAA5.9 | 4550 | 3600 | 1810 | 2378 | 3100 | |
| MDS690S-14 | 19.3 | 689 | 14 | 203 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 | |
| MDS720S-10 | 20.2 | 721 | 10 | 145 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 | |
| MDS750S-12 | 21 | 750 | 12 | 174 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 | |
| MDS786S-10.3 | 22 | 786 | 10.3 | 149.35 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 | |
| MDS820S-14 | 23 | 821 | 14 | 203 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 | |
| MDS850S-8.6 | 24 | 857 | 8.6 | 124.7 | 6CTAA8.3 | 5300 | 4200 | 2170 | 2630 | 4600 | |
| MDS900S-7.1 | 25.3 | 904 | 7.1 | 102.95 | 6CTA8.3 | 5300 | 4200 | 2170 | 2630 | 4600 | |
| Middle Series (Medium&High pressure) | |||||||||||
| Middle Series (Medium&High pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | |||||||
| m3/min | cfm | Bar | psig | length | width | height | weight(kg) | ||||
| model | with tow bar | without tow bar | |||||||||
| MDS460S-17 | 13 | 464 | 17 | 246.5 | 6BTAA5.9 | 4600 | 3500 | 1800 | 2230 | 3500 | |
| MDS620S-17 | 17.4 | 621 | 17 | 246.5 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 | |
| MDS650S-19 | 18.2 | 650 | 19 | 275.5 | QSL8.9 | 5300 | 4200 | 2170 | 2630 | 5200 | |
| MDS690S-20.4 | 19.4 | 693 | 20.4 | 295.8 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 | |
| MDS770S-21 | 21.6 | 771 | 21 | 304.5 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS830S-18 | 23.2 | 830 | 18 | 261 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS820S-25 | 23 | 821 | 25 | 362.5 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5600 | |
| MDS860S-20.4/17.3 | 24.2 | 864 | 20.4 | 295.8 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| 24.2 | 864 | 17.3 | 250.85 | ||||||||
| MDS875S-23 | 24.5 | 875 | 23 | 333.5 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5600 | |
| Large Series (Low&Medium pressure) | |||||||||||
| Large Series (Low&Medium pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | |||||||
| m3/min | cfm | Bar | psig | length | width | height | weight(kg) | ||||
| model | with tow bar | without tow bar | |||||||||
| MDS900S-14.2/10.5 | 25.1 | 896 | 14.2 | 205.9 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| 25.2 | 900 | 10.5 | 152.25 | ||||||||
| MDS910S-14 | 25.6 | 914 | 14 | 203 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS970S-10 | 27.2 | 971 | 10 | 145 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS1011S-8.6 | 28.3 | 1011 | 8.6 | 124.7 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS1054S-12 | 29.5 | 1054 | 12 | 174 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS1250S-8.6 | 35 | 1250 | 8.6 | 124.7 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 | |
| MDS1400S-13 | 40 | 1400 | 13 | 188.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 | |
| MDS1600S-10.3 | 45 | 1600 | 10.3 | 149.35 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 | |
| MDS1785S-13 | 50 | 1785 | 13 | 188.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 | |
| MDS2140S-10 | 60 | 2142 | 10 | 145 | QSZ14 | 7400 | 5400 | 2230 | 2630 | 8400 | |
| Large Series (Medium&High pressure) | |||||||||||
| Large Series (Medium&High pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | |||||||
| m3/min | cfm | Bar | psig | length | width | height | weight(kg) | ||||
| model | with tow bar | without tow bar | |||||||||
| MDS900S-20 | 25.3 | 904 | 20 | 290 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5800 | |
| MDS960S-18 | 26.9 | 961 | 18 | 261 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5800 | |
| MDS1000S-35 | 28.2 | 1000 | 35 | 507.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 | |
| MDS1089S-25 | 30.5 | 1089 | 25 | 362.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 | |
| MDS1200S-24 | 33.6 | 1200 | 24 | 348 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 | |
| MDS1250S-21 | 35 | 1250 | 21 | 304.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 | |
| MDS1250S-25 | 35 | 1250 | 25 | 362.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 | |
| MDS1250S-30 | 35 | 1250 | 30 | 435 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 | |
| MDS1250S-35 | 35 | 1250 | 35 | 507.5 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 | |
| MDS1250S-40 | 35 | 1250 | 40 | 580 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 | |
| MDS1428S-18 | 40 | 1428 | 18 | 261 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 | |
| MDS1428S-35 | 40 | 1428 | 35 | 507.5 | TAD1643VE-B | 7400 | 5500 | 2180 | 2650 | 10000 | |
| MDS1428S-40 | 40 | 1428 | 40 | 580 | QSK19 | 7400 | 5500 | 2180 | 2650 | 10000 | |
| MDS1600S-25 | 44.8 | 1600 | 25 | 362.5 | WP17G770E302 | 7400 | 5500 | 2180 | 2650 | 10000 | |
| GTL Air compressor test system |
FAQ:
Q: Are you a trading company or manufacturer?
A: We are a manufacturer.
Q: What are the products you operate?
A: CHINAMFG Power System is committed to the R&D and manufacturing of Diesel Generator, Screw Air Compressor, Diesel Pump, Lighting Tower, Welding Generator and related control system and accessories.
Q: How long is your delivery time?
A: 7-30 day
Q: What is your terms of payment?
A: T/T 30% in advance and TT 70% balance paid before shipment / 100% LC at sight.
Q: What is your warranty period?
A: Our payment terms are 12 months or 1000 running hours whichever comes first. But based on some special project, we can extend our warranty period.
Q: Do you provide customized services for the diesel generator?
A: Yes!
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Warranty: | 24month/2000 Hours |
|---|---|
| Lubrication Style: | Lubricated |
| Cooling System: | Water Cooling |
| Customization: |
Available
|
|
|---|
.webp)
What are the advantages of using an air compressor in construction?
Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:
- Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
- Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
- Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
- Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
- Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
- Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
- Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.
It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.
In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.
How are air compressors used in refrigeration and HVAC systems?
Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:
1. Refrigerant Compression:
In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.
2. Refrigeration Cycle:
The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.
3. HVAC Cooling and Heating:
In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.
4. Air Conditioning:
Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.
5. Compressor Types:
Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.
6. Energy Efficiency:
Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.
By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.
.webp)
What is the role of air compressor tanks?
Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:
1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.
2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.
3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.
4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.
5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.
6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.
Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
editor by CX 2023-09-27
China manufacturer Oil Free Screw Air Compressor Low Noise Technologies with Best Sales
Product Description
Product Description
With CE and Class 0 certification, the CZPT dry rotary screw oil-free air compressor can provide you with 100% oil-free air and ensure the safety of your manufacturing line. Power ranges from 37 to 315 kilowatts.
Runningway fixed speed dry oil-free screw air compressor can provide oil-free air for a long time. Can provide you with a steady supply of air.
The CZPT VSD dry oil-free screw air compressor may provide variable frequency air to a system. Saving money allows you to meet your various air capacity requirements. The air capacity ranges between 2.6 and 51.5 m3/min.
Product Parameters
| Model | Maximum Working Pressure | Capacity(FAD)* | Installed Motor Power | Cooling Method | Noise Level | Air Outlet Pipe Diameter |
Dimension | Weight | |||||
| 50hz | |||||||||||||
| bar(g) | psig | m3/min | cfm | kw | hp | dB(A) | L | W | H | kg | |||
| RF37-7A(W) | 7 | 102 | 6.5 | 229.5 | 37 | 50 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 |
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2000 | |||||||
| RF37-8A(W) | 8 | 116 | 6.4 | 226 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2000 | |||||||
| RF37-10A(W) | 10 | 145 | 6.3 | 222.4 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2000 | |||||||
| RF45-7A(W) | 7 | 102 | 7.7 | 271.8 | 45 | 60 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 |
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF45-8A(W) | 8 | 116 | 6.5 | 229.5 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF45-10A(W) | 10 | 145 | 6.8 | 240.1 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF55-7A(W) | 7 | 102 | 9.6 | 339 | 55 | 75 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 |
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2000 | |||||||
| RF55-8A(W) | 8 | 116 | 8.8 | 310.7 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2000 | |||||||
| RF55-10A(W) | 10 | 145 | 7.7 | 271.9 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2000 | |||||||
| RF75-7A(W) | 7 | 102 | 13.5 | 476.7 | 75 | 100 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 |
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF75-8A(W) | 8 | 116 | 13.3 | 469.6 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF75-10A(W) | 10 | 145 | 12.1 | 427.3 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 1900 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF90-7A(W) | 7 | 102 | 16.2 | 572 | 90 | 120 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 2000 |
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF90-8A(W) | 8 | 116 | 15.6 | 550.9 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 2000 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF90-10A(W) | 10 | 145 | 14.2 | 501.4 | Air Cooling | 70 | DN50 | 2160 | 1450 | 2200 | 2000 | ||
| Water Cooling | 63 | DN80 | 2180 | 1450 | 2200 | 2100 | |||||||
| RF110-7A(W) | 7 | 102 | 19.5 | 688.6 | 110 | 150 | Air Cooling | 69 | DN80 | 4050 | 1650 | 2000 | 3700 |
| Water Cooling | 67 | DN80 | 2550 | 1650 | 2000 | 2700 | |||||||
| RF110-8A(W) | 8 | 116 | 19.2 | 678 | Air Cooling | 69 | DN80 | 4050 | 1650 | 2000 | 3700 | ||
| Water Cooling | 67 | DN80 | 2550 | 1650 | 2000 | 2700 | |||||||
| RF110-10A(W) | 10 | 145 | 17.5 | 618 | Air Cooling | 69 | DN80 | 4050 | 1650 | 2000 | 3700 | ||
| Water Cooling | 67 | DN80 | 2550 | 1650 | 2000 | 2700 | |||||||
| RF132-7A(W) | 7 | 102 | 23.5 | 829.8 | 132 | 175 | Air Cooling | 70 | DN80 | 4050 | 1650 | 2000 | 3700 |
| Water Cooling | 67 | DN80 | 2550 | 1650 | 2000 | 2800 | |||||||
| RF132-8A(W) | 8 | 116 | 22.8 | 805.1 | Air Cooling | 70 | DN80 | 4050 | 1650 | 2000 | 3700 | ||
| Water Cooling | 67 | DN80 | 2550 | 1650 | 2000 | 2800 | |||||||
| RF132-10A(W) | 10 | 145 | 20.5 | 723.9 | Air Cooling | 70 | DN80 | 4050 | 1650 | 2000 | 3700 | ||
| Water Cooling | 67 | DN80 | 2550 | 1650 | 2000 | 2800 | |||||||
| RF145-7A(W) | 7 | 102 | 23.9 | 844 | 145 | 195 | Air Cooling | 70 | DN80 | 4050 | 1650 | 2000 | 3800 |
| Water Cooling | 68 | DN80 | 2550 | 1650 | 2000 | 2900 | |||||||
| RF145-8A(W) | 8 | 116 | 22.1 | 780.4 | Air Cooling | 70 | DN80 | 4050 | 1650 | 2000 | 3800 | ||
| Water Cooling | 68 | DN80 | 2550 | 1650 | 2000 | 2900 | |||||||
| RF145-10A(W) | 10 | 145 | 20.5 | 723.9 | Air Cooling | 70 | DN80 | 4050 | 1650 | 2000 | 3800 | ||
| Water Cooling | 68 | DN80 | 2550 | 1650 | 2000 | 2900 | |||||||
| RF160-7A(W) | 7 | 102 | 28.5 | 1006.4 | 160 | 215 | Air Cooling | 75 | DN80 | 5040 | 1650 | 2100 | 5300 |
| Water Cooling | 67 | DN80 | 3100 | 1650 | 2000 | 2900 | |||||||
| RF160-8A(W) | 8 | 116 | 26.4 | 932.3 | Air Cooling | 75 | DN80 | 5040 | 1650 | 2100 | 5300 | ||
| Water Cooling | 67 | DN80 | 3100 | 1650 | 2000 | 2900 | |||||||
| RF160-10A(W) | 10 | 145 | 24.5 | 865.2 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5300 | ||
| Water Cooling | 67 | DN80 | 3100 | 1650 | 2000 | 2900 | |||||||
| RF200-7A(W) | 7 | 102 | 36.1 | 1274.8 | 200 | 270 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5400 |
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4000 | |||||||
| RF200-8A(W) | 8 | 116 | 33.9 | 1197.1 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5400 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4000 | |||||||
| RF200-10A(W) | 10 | 145 | 30.8 | 1087.6 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5400 | ||
| Water Cooling | 67 | DN80 | 3100 | 1650 | 2000 | 4000 | |||||||
| RF250-7A(W) | 7 | 102 | 45.2 | 1596.2 | 250 | 350 | Air Cooling | 75 | DN80 | 5040 | 1650 | 2100 | 5500 |
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4100 | |||||||
| RF250-8A(W) | 8 | 116 | 43.4 | 1532.6 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5500 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4100 | |||||||
| RF250-10A(W) | 10 | 145 | 38.8 | 1370.2 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5500 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4100 | |||||||
| RF275-7A(W) | 7 | 102 | 46.8 | 1652.7 | 275 | 370 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5500 |
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4200 | |||||||
| RF275-8A(W) | 8 | 116 | 43.5 | 1536.1 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5500 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4200 | |||||||
| RF275-10A(W) | 10 | 145 | 41.5 | 1465.5 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5500 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4200 | |||||||
| RF315-7A(W) | 7 | 102 | 53 | 1871.6 | 315 | 420 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5800 |
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4400 | |||||||
| RF315-8A(W) | 8 | 116 | 51.5 | 1818.7 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5800 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4400 | |||||||
| RF315-10A(W) | 10 | 145 | 49.5 | 1748 | Air Cooling | 76 | DN80 | 5040 | 1650 | 2100 | 5800 | ||
| Water Cooling | 65 | DN80 | 3100 | 1650 | 2000 | 4400 | |||||||
Detailed Photos
| After-sales Service: | on Line Support |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Customization: |
Available
|
|
|---|
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
editor by CX 2023-06-14
China manufacturer High Efficiency Oil Lubricated Stationary Electric Motor Fixed Speed Direct Drive VSD Screw Type Air Compressor air compressor oil
Product Description
Our services:
1:Good after sales service: Any small problem happening will be solved at the most prompt time.
2. We have many years of experience, we have specializing in fastener.
3. Specifications list is available CZPT your requirement.
4. Packing as your request before shipment.
5. High quality and competitive price.
| After-sales Service: | Feedback |
|---|---|
| Warranty: | One Year |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
What to Look For When Buying an Air Compressor
An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
Single-stage air compressors are quieter
When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over three thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
Two-stage air compressors are more energy efficient
Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have two pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.
Piston-driven air compressors are quieter
A piston-driven air compressor is one of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The two main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the two types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
Oil-lubricated air compressors are more cost-effective
There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose one with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which one is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.
editor by CX 2023-05-26
China Standard High Efficiency Oil Lubricated Stationary Electric Motor Fixed Speed Direct Drive VSD Screw Type Air Compressor manufacturer
Product Description
Our services:
1:Good after sales service: Any small problem happening will be solved at the most prompt time.
2. We have many years of experience, we have specializing in fastener.
3. Specifications list is available CZPT your requirement.
4. Packing as your request before shipment.
5. High quality and competitive price.
| After-sales Service: | Feedback |
|---|---|
| Warranty: | One Year |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Customization: |
Available
|
|
|---|
A Buyer’s Guide to Air Compressor Types
There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
Single-stage air compressors
A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.
Rotary vane compressors
Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
Rotary vane compressors with low-noise models
If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
Rotary vane compressors with two pistons
The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.
editor by CX 2023-05-25
China 10m3min 13bar Mobile Mining Diesel Portable Screw Air Compressor for Sand Blasting manufacturer
Issue: New
Type: Screw
Configuration: Transportable
Energy Source: Diesel
Lubrication Fashion: Lubricated
Mute: NO
Dimension(L*W*H): 3220*1850*1850mm
Warranty: 1 Calendar year
Solution title: 10m3/min 13bar Mining Quarry Diesel Transportable Screw Air Compressor
Software: for mining, development,coal,drinking water well and many others
Diesel motor: Cummins,Yuchai,Weichai
Rated energy: 110kw/120kw
Diesel motor design: 6BTA5.9/YC6108ZG/WP4B120
Operating strain: 13bar
Potential: 10m3/min
Rated Roate pace: 24/, Oem Odm Maker Personalized National Standard Plastic Pipe Fittings Drinking water Pipe Put in Portable Flange Worm Gearbox welcome your contacting!!
Company Data
Our factory was started in 1997,handles an spot of 173,160 sq. meters,within there are 70,000 square CZPT normal workshops. We has superior manufacturing lines,assembly lines,good quality control heart and electrostatic spray coating lines.Manufactures in creating air compressors and drilling machines. We at the moment manufactures a vast range of machines,this sort of as all sorts of piston air compressors,screw air compressors,pneumatic rock drills,pneumatic and hydraulic down hole drills,breakers,drilling wagons and so on.
In Might twenty fifth 2016 Our manufacturing facility signed a strategic cooperation agreement with CZPT (China) Expense Co., Ltd. Beneath the settlement, CZPT and our team will jointly build, make and market mining & design equipments.
Device working website
Certifications
Packaging & Transport
Our ServicesPre-Product sales Support After-Sale Support
•Professional sale support your inquiry & consulting •Training assist of equipment procedure
•Customized your devices answers •Spare components source assistance HIAORS 420 Chain 50T 40mm Stainless Steel Travel Wheel Sprocket for Coleman BT200X CT200U Baja Motorcycle Mini Bicycle Parts
•Factory & device inspected •Problems & Specialized provide
•Training assist •Engineers available to services device abroad.
FAQ1. How extended is your air compressor & drilling rig warranty? ∗ 1 a long time for the complete device after leave the factory2. Do you supply After- income provider components? ∗Of training course, we have.3.How extended could your device be employed? ∗More than 10 several years if have standard upkeep.4. How is your equipment top quality?
∗All the machines have to pass the rigid take a look at prior to depart manufacturing unit.
And our factory has earlier mentioned 20 a long time producing knowledge,can gurantee the top quality.5.Which payment time period you accpet?
∗Now we will accpet TT,LC,Western Union,Trade Assurance online,Paypal,Cash,and so on.
six.How about the supply time?
∗Within about 1 7 days.
7.Can check out your manufacturing unit?
∗Yes,welcome to our manufacturing unit. We will treat you in China,and pick you up at airport.
We are near to Xihu (West Lake) Dis. Airport.
8.Are you a manufacturer?
∗ CZPT 1.26N.m nema 23 stepper motor with planetary worm or eccentric gearbox reducer ratio 151 for cnc equipment We are trade offcie in ZheJiang m,our manufacturing unit is in ZHangZhoug.
Adhere to us
Atals Copco GIA Rig
what to see in an air compressor
If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.
Pump
If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying one from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
safety equipment
There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these two safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.
CFM Rating
An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in one square inch of air. These two indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
Lack of oil and lubrication
Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
noise level
If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
editor by Cx 2023-05-04
China 2020 Hot Selling 75kw Diesel Screw Air Compressor Portable manufacturer
Merchandise Description
| Solution description: |
| Specification: |
Certifications:
| Organization Info: |
HangZhou CZPT Air Compressor Production Co., Ltd. is found in the logistics funds of China, 1 of the essential birthplaces of Chinese civilization-HangZhou, ZheJiang Province. With professinal production expertise and very first -class complete scientific and technological energy of the expertise crew, as the power-preserving compressor method leader and renowed in the sector.
We specializes in R & D and income of energy frequency ,everlasting magnet frequency conversion ,two -phase compressor permanent magnet frequency conversion ,low -voltage and cell screw air compressor . With a deep sector history , 1 phase forward ambition . With the professional enthusiasm for screw air compressor , crew innovation , to meat the issues of enterprise’s very own perseverance and the demanding frame of mind of excellence,items are strictly in accordance with IOS 9001 global top quality methods,to give buyers with energy -conserving and dependable merchandise .
We warmly welcomes folks from all all around the world to check out the organization to CZPT the institution of a vast range of business contacts and cooperation . Picking HangZhou Atlas Air compressor Producing Co.,Led.is to pick high quality and service ,select culture and flavor ,pick a long lasting and reputable associate !
FAQ:
Q1: Are you factory or trade organization?
A1: We are manufacturing facility. You should examine Our Firm Profile.
Q2: What the precisely handle of your manufacturing facility?
A2: Xihu (West Lake) Dis. Innovation Park, Zaoyuan Town, HangZhou, ZheJiang , China
Q3: Warranty terms of your equipment?
A3: 18 months warranty for the device,specialized assistance in accordance to your requirements.
This fall: Will you supply some spare parts of the equipment?
A4: Sure.
Q5: How extended will you take to arrange generation?
A5: Provide normal items inside of 30days, Other personalized merchandise is TBD.
Q6: Can you settle for OEM orders?
A6: Indeed, with professional layout group, OEM orders are very welcome.
|
US $4,300-50,000 / Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | Diesel Engine |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Movable Type |
###
| Samples: |
US$ 4300/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product description: |
###
| Specification: |
###
| Company Information: |
|
US $4,300-50,000 / Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | Diesel Engine |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Movable Type |
###
| Samples: |
US$ 4300/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product description: |
###
| Specification: |
###
| Company Information: |
What to Look For When Buying an Air Compressor
An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
Single-stage air compressors are quieter
When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over three thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
Two-stage air compressors are more energy efficient
Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have two pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.
Piston-driven air compressors are quieter
A piston-driven air compressor is one of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The two main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the two types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
Oil-lubricated air compressors are more cost-effective
There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose one with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which one is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.
editor by czh 2022-11-27
China OEM Compressor Machine Manufacturer Best Selling Oil Free 7.5KW 8Bar Screw Air Compressors for Purification Industry with high quality
Applicable Industries: Producing Plant, Power & Mining, Other, equipment producing, Pharmaceutical industry, foodstuff market, Cotton Spinning Business, Purification Industry, Substantial Precision Electronics Market
Showroom Area: Turkey, United States, Germany, Russia, Spain, Kazakhstan, Tajikistan
Issue: New, New
Type: Screw
Configuration: Stationary
Electricity Resource: AC Energy
Lubrication Style: Oil-cost-free
Mute: NO, 72±2 dB
Product Quantity: AOT7.5-10P
Voltage: 380V/415V/440V
Dimension(L*W*H): a thousand*750*1100MM
Weight: 400KG
Guarantee: 1 Calendar year
Doing work Force: .8 Mpa
Air capability: Custom
Machinery Examination Report: Provided
Video outgoing-inspection: Presented
Advertising Type: Normal Solution
Guarantee of core components: 5 a long time
Main Elements: Motor, Pump, Bearing
Fuel Sort: Air
Merchandise Name: Screw Air Compressor
Compressor Product: AOT7.5-10P
Electricity: 7.5KW
Force: .8Mpa
Packaging Particulars: AOT7.5-10P Screw Air CompressorSpecial packaging for export, free of charge from fumigationThis alluse for screw air compressorPacking sort: iron frame picket circumstance Package deal size:1100*850*1200 (mm) Gross excess weight:500KG
Port: ZheJiang
Particulars Photos Technical Parameters
| Model Variety | AOT7.5-10P | Stress (bar) | eight bar |
| Electricity (KW) | 7.5 KW | Noise (dB) | 72±2 |
| Discharge quantity stream(m3/min) | 1. | Dimension (mm) | one thousand*750*1100 |
| Bodyweight (KW) | 400 | Export Size | Rp3/four |
| Model(Oil Totally free screw compressor) | Discharge volume flow(mthree/min) | powerKW | PressureMpa | Dimensions: length*width *heightmm | Export dimension | Machine excess weight KG | Noise dB(A) |
| AOT7.5-10P | 1. | 7.5 | 0.8 | 1000*750*1100 | Rp3/4 | 400 | 72±2 |
| AOT11-15P | 1.6 | 11 | 0.eight | 1100*845*1260 | Rp3/four | 460 | 72±2 |
| AOT15-20P | 2.five | 15 | 0.8 | 1260*900*1360 | Rp3/4 | 620 | 72±2 |
| AOT18.5-25P | 3. | 18.5 | 0.eight | 1520*1060*1450 | Rp3/four | 750 | 72±2 |
| AOT22-30P | 3.six | 22 | 0.eight | 1520*1060*1450 | Rp1 | 840 | 72±2 |
| AOT37-50P | 6.two | 37 | 0.8 | 1520*1060*1450 | Rp1-1/two | 1571 | 72±2 |
| AOT45-60P | 7.3 | 45 | 0.8 | 17630*1160*1550 | Rp2 | 930 | 72±2 |
| AOT55-75P | 10 | 55 | 0.eight | 1900*1250*1340 | Rp2 | 970 | 72±2 |
| AOT75-100P | 13 | 75 | 0.8 | 1520*1060*1450 | Rp2 | 1571 | 72±2 |
| AOT90-125P | 15 | 90 | 0.eight | 2200*1600*1700 | Rp2 | 2050 | 72±2 |
| AOT110-150P | 20 | 110 | 0.eight | 2200*1600*1700 | DN80 | 2330 | 72±2 |
| AOT132-180P | 23 | 132 | 0.8 | 1520*1060*1450 | DN80 | 2560 | 72±2 |
Packing&Delivery FAQ
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by czh
China Good quality 2020 New Design Cost Effective Wholesale Integrated 15kw 20HP Oilless Combined Rotary Screw Air Compressor Manufacturer with high quality
Merchandise Description
I.Parameter List
II.Solution Information
III.Supply and Package
IV.FAQ
Q1: How can I get the quotation?
A: You can suggest us the component quantity for examining, and we will estimate to you before long by electronic mail.
Q2:What variety of techniques for transportation ?
A:In general by air, sea or Convey.(like DHL,Fedex,TNT,and many others.)
Q3:How do I know the quality of productions?
A:We have a strict sequence of quality management, and we have excellent right after services program, which can help you to remedy the issue shortly
Q4: If i want to modify model,measurement,deal,and so on. How can I do?
A:You can contact us and we will revise according to your prerequisite
Q5:What is the conditions of payment ?
A: L/C, T/T, Paypal(want 5% paypal payment) in advance.
Choose an Air Compressor for Your Company
There are several elements to take into account when deciding on an air compressor for your business. A single issue to take into account is the sort of compressor you are looking for, which might contain one-stage, low sound, and optimistic displacement. Hope this post will help you make the correct choice. Soon after all, your business achievement will count on this device! Let us get a nearer look at these aspects. Also, think about what compressor makers say about their goods.
Positive displacement
Optimistic displacement air compressors compress air by drawing in a quantity from an inlet and extruding it out of a chamber. This increases the stress at which the fuel can be pumped at rates that are not able to be pumped via the outlet at reduced pressures at higher mass movement rates. These sorts of compressors are accessible in single-acting and double-performing configurations. They are categorized by the number of cylinders.
There are two various kinds of air compressors: reciprocating air compressors and screw compressors. Equally are roll devices. Good displacement air compressors use pistons and cylinders to compress air. The ensuing air stress builds up within the compressor housing, rising the possible vitality of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be possibly solitary-stage screw-blade air compressors or multi-phase screw-blade oil-immersed screw air compressors.
Good displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The quantity of moments the chamber was refilled and emptied was utilised to estimate the overall circulation. Nevertheless, constructive displacement stream meters are prone to leaks, lowering the precision of the estimates. If a leak occurs, it can cause false readings and injury the compressor. Nonetheless, leaks in constructive displacement air compressors can reduce pressure.
The most common sorts of good displacement air compressors are screw, reciprocating, and vane. Rotary constructive displacement air compressors are also obtainable as well as a lot of other air compressors. Optimistic displacement air compressors are most commonly used in massive manufacturing amenities. If you are thinking about an air compressor for professional or industrial purposes, it is crucial to realize how the parts of the device function. Make sure you go through the details underneath to discover far more prior to choosing which software is greatest for you.
Constructive displacement air compressors use a piston to force air into a chamber, compressing the air in the method. The piston moves in the reverse path, therefore minimizing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, permitting it to escape at higher force. Optimistic displacement air compressors are normally less efficient than centrifugal compressors. However, they are nevertheless an superb decision for a range of programs.
One-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Appropriately designed load/unload controls allow the air compressor to run at its most effective point while minimizing anxiety on the major motor bearings. One-stage air compressors can approach variable pace performance with proper storage potential. Nevertheless, poor storage can result in untimely bearing wear on the major unit. If this is the scenario, a solitary-phase air compressor may possibly not be best.
A solitary-phase air compressor has only one cylinder, which signifies one stroke is needed to transfer air from one cylinder to one more. Pressure is measured in cubic ft per minute or CFM. Tank size is also critical as a huge single-phase air compressor might be required to operate a number of air instruments. Solitary-phase air compressors can be utilized in a assortment of programs and can last for a long time.
For the most typical utilizes, solitary-stage air compressors are the most useful choice. These devices function with most hand equipment, from hammers to grinders. Solitary-phase air compressors are lightweight and straightforward to move. However, two-stage air compressors supply more CFM, producing them a greater selection for industrial or business use. Even so, two-phase compressors are not ideal for private use. Consequently, if your primary function is Diy and craft initiatives, it is better to choose a one-stage air compressor.
In contrast with two-phase air compressors, single-stage screw air compressors are less costly. They arrive from a assortment of manufacturers and range in electricity from 3 to 600 horsepower. Solitary-stage air compressors are a cost-powerful solution for a range of air compressor demands. They provide flexibility and several manage methods, making them an excellent choice for numerous various programs. Therefore, when selecting an air compressor for your enterprise, choose the one with the most appropriate capabilities.
One-stage air compressors are the most affordable and straightforward-to-use air compressors for little to medium employment. They also have greater compression ratios. The compression ratio is the ratio of absolute discharge strain to complete inlet force. When calculating the ratio, it normally takes into account atmospheric stress and gauge stress. The compression ratio pushes the surface location of the rotor, which will increase the thrust load.
One-stage air compressors are smaller sized and less complicated to transportation than two-stage models. Solitary-stage air compressors have one air consumption, and two-phase air compressors have two air intakes. The big difference between single-phase and two-phase air compressors largely relies upon on the number of occasions the air is compressed. A solitary-stage air compressor compresses the air when, while a dual-phase air compressor compresses the exact same volume of air two times.
reduced sound
Lower sounds air compressors are perfect for a range of apps. Even though no air compressor is fully silent, some models are a lot quieter than other people. For the Hitachi EC28M transportable compressor, the sound amount is fifty nine decibels. The compressor functions metal rollers that shield the internal components and give it a sleek, contemporary search. It also has a 1-gallon gasoline tank and a 50 percent-horsepower push.
Noise from air compressors can be distracting and lessen productivity. It is critical to decide on minimal-noise air compressors to maintain workers healthy and happy at work. Even though noise is an unfortunate factor of doing work on the store floor, decreasing it can increase productivity. By reducing distracting sounds, employees can target on their operate and communicate far more efficiently. That means larger top quality function and happier consumers. If you are hunting for a lower-sounds air compressor, be certain to go through the guidelines underneath.
Reduced sound air compressors are an excellent selection for firms of all sizes. These powerful equipment can run several instruments simultaneously. The two drinking water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can take care of huge positions with ease. It charges more than other air compressors, but it can manage a whole lot of operate successfully. CZPT Air Tools air compressors arrive with a one-year warranty and are extremely advised by contractors.
Noiseless air compressors are typically much more pricey than equivalent merchandise, but they are really worth the extra price. Noiseless compressors are a great choice for organizations that require to keep away from disturbing nearby individuals. For instance, you might want to consider a reduced-noise air compressor for a dental business office, which cannot tolerate sounds. The good news is, this issue can be solved by relocating the compressor to a location that is much more isolated from your workspace.
A single model of low-sound air compressors offers two designs. The CZPT Air Equipment 2010A attributes a massive solid aluminum can, regulating stress gauge, and two universal rapid-connects. It creates sixty eight decibels of sound when it operates. It has a big 8-gallon fuel tank ability and has wheels and handles for simple transport. Its potent motor creates a lower noise stage of sixty eight decibels.
An additional common minimal sounds air compressor is the Makita MAC210Q Peaceful Collection. This product is able of making up to 71.5 decibels of sound, which is the volume of air it makes at 90PSI. The MAC210Q attributes a tough oil-free pump and weighs just 36 kilos with a deal with and wheels. These compressors are effortless to transfer and ideal for indoor work.