China High Performance Diesel Engine Vertical Gtl 3330X1750X1640mm China Rotary Air 185cfm Screw Compressor lowes air compressor

Merchandise Description

Model  MDS185-FF
Compressor Air
delivery
m3/min

5.eighteen

cu.ft/min   185
Discharge force bar 7
psig 101.five

Lubricating Oil Ability

L 23
Diesel
Motor
Manufacture&Model

Foxair-4571DF-005

Cylinder Number 4
Rotation pace(Rmp) Operating 2650
Idle pace(r/min) 2200
Rated power(KW)

42

Lubricating Oil ability(L) 300

Displacement (L)

2.7

Lubricating Oil Ability (L)

7

Coolant Capacity (L)

9

Battery

6-QW-70

Standard Configuration

Suction valve                                    Lubricating oil filter                           Oil thermostatic valve                                             50°C radiator
 Solenoid valve                                Vertical air/oil tank                                Pressure typical valve                              Air/oil separator                     

  Lubricating oil radiator       Safety valve                                                   Emergency cease button                                 Air filter of engine
 Minimum force valve       Lockable battery isolator switch                                                                                                                                                                 
 Air filter of compressor        Vent valve                                                       Powder coated canopy                                           Shuttle valve    
 24V sealed for life maintenance free of charge battery                                Gas tank for 8 several hours working

General Features

Construction diagram

1. Lifting bail   2.Exhaust outlet   3.Door    4. Handle   5.Services valve    6. Instrument panel

 

Characteristic&Advantage
Feature   Benefit
Pressure variety and handle Easy force placing
Flow selection and management The doing work stress and airflow rate can be adjusted according to the measurement of air consumption without throwing away any diesel
The twin-screw rotor is right connected with the diesel motor by a hugely versatile coupling Outputting much more air with less vitality usage, featuring substantial reliability, lengthier support existence, and lower maintenance value.
The two-phase air filtration technique The whole efficiency of air filtration reaches 99.8% making certain the compressor to not be infringed by dust and dirt particles and more time service daily life of the engine
High-temperature resistance layout Able to run for a extended time below extreme chilly or sizzling temperature from -20ºC to 50ºC
One-button start, clear operational parameters Operators do not have to go by way of lengthy-phrase professional education, and unattended functions can be attained.

 

Software areas

Field Application Nominal Doing work Pressure(bar) Free Air Delivery Range(m3/min)
General Building
(building sites, highway upkeep, bridges, tunnels, concrete pumping and shotcreting)
Hand-held pneumatic breakers 7~14 5~13
Jack hammers
Air guns
Shotcrete gear
Pneumatic wrenches
Nut runners
Ground Engineering Drilling 
(basement and foundation excavation for apartment blocks and other properties)
Pneumatic rock drills 7~17 12~28
Block cutters
Dewatering pumps.
Hand-held pneumatic breakers
Utility, CZPT Blasting
(shipyards, metal construction and big renovation work)
Sandblasting
(eliminate rust, scale, paint)
7~10 10~22
Blast Gap Drilling
(combination manufacturing for construction stabilization, cement generation in limestone quarries and open up pit mining)
Rock drills 14~21 12~29
Dewatering pumps
Hand-held breakers
High Pressure Drilling
(drilling for drinking water wells and foundations for substantial-increase properties, alongside with geotechnical/geothermal applications)
Water effectively drilling 20~35 18~forty
 DTH drilling
Rotary drilling

 

Assortment desk

Modest Series
Small Collection FAD Pressure Engine design Dimensional Day(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar with out tow bar
MDS55S-7 one,55 55  7 one zero one,five  D902 2925 1650 1200 1200 600
MDS80S-seven two,24 80  7 101,five D1005 2925 1650 1200 1200 630
MDS100S-seven 2,8 100  seven one hundred and one,5 V1505 2925 1650 1200 1200 640
MDS125S-seven 3,five 125  7 a hundred and one,5 V1505 3065 1800 1500 1350 810
MDS130S-eight 3,7 132  8 116 JE493 3065 1800 1500 1350 810
MDS185S-seven five,18 185  7 a hundred and one,5 JE493 3200 1900 1740 1660 950
MDS185S-10 5,eighteen 185  10 a hundred forty five JE493 3050 1900 1740 1660 950
 
Middle Series  (Minimal&Medium pressure)
Middle Series  (Lower&Medium force) FAD Pressure Engine design Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
product with tow bar without having tow bar
MDS265S-seven 7,forty two 265  seven 101,five JE493 3629 2200 1700 1470 1200
MDS300S-14 8,four 300  fourteen 203 4BTA3.nine 3850 2600 1810 2378 1800
MDS350S-10 9,nine 354  10 145 4BT3.9 3850 2600 1810 2378 1800
MDS390S-7 11 393  7 101,5 4BTA3.nine 3850 2600 1810 2378 1800
MDS390S-13 11 393  thirteen 188,five QSB4.five 3850 3100 1810 2378 1980
MDS429S-7 twelve 429  7 a hundred and one,5 4BTA3.9 3850 2600 1810 2378 1800
MDS429S-14 12 429  fourteen 203 QSB4.5 3850 3100 1810 2378 1980
MDS500S-14 fourteen,1 504  14 203 6BTAA5.nine 4550 3600 1810 2378 3100
MDS690S-14 19,3 689  fourteen 203 QSB6.seven 4950 3300 2170 2620 3500
MDS720S-10 twenty,2 721  ten 145 QSB6.7 4950 3300 2170 2620 3500
MDS750S-12 21 750  12 174 QSB6.7 4950 3300 2170 2620 3500
MDS786S-ten.three 22 786  ten,three 149,35 QSB6.7 4950 3300 2170 2620 3500
MDS820S-14 23 821  14 203 6LTAA8.nine 5300 4200 2170 2630 5200
MDS850S-8.six 24 857  eight,six 124,7 6CTAA8.three 5300 4200 2170 2630 4600
MDS900S-7.one 25,three 904  7,one 102,95 6CTA8.three 5300 4200 2170 2630 4600
 
Middle Series (Medium&Substantial force)
Middle Sequence (Medium&Large force) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar with out tow bar
MDS460S-seventeen 13 464  seventeen 246,5 6BTAA5.nine 4600 3500 1800 2230 3500
MDS620S-seventeen 17,4 621  17 246,five 6LTAA8.9 5300 4200 2170 2630 5200
MDS650S-19 18,two 650  19 275,5 QSL8.nine 5300 4200 2170 2630 5200
MDS690S-20.4 19,4 693  twenty,four 295,eight 6LTAA8.9 5300 4200 2170 2630 5200
MDS770S-21 21,six 771  21 304,5 6LTAA8.nine 5300 4200 2100 2630 5280
MDS830S-eighteen 23,two 830  18 261 6LTAA8.nine 5300 4200 2100 2630 5280
MDS820S-twenty five 23 821  twenty five 362,5 QSM11 5300 4200 2100 2630 5600
MDS860S-twenty.4/17.three 24,2 864  twenty,4 295,eight QSL8.9 5300 4200 2100 2630 5280
24,2 864  seventeen,3 250,eighty five
MDS875S-23 24,5 875  23 333,5 QSM11 5300 4200 2100 2630 5600
 
Huge Series    (Lower&Medium force)
Large Series    (Reduced&Medium strain) FAD Pressure Engine model Dimensional Day(mm)
m3/min cfm Bar psig length width height weight(kg)
product with tow bar with out tow bar
MDS900S-fourteen.2/ten.5 25,1 896  14,2 205,nine 6LTAA8.9 5300 4200 2100 2630 5280
twenty five,2 900  10,five 152,25
MDS910S-fourteen twenty five,six 914  fourteen 203 6LTAA8.9 5300 4200 2100 2630 5280
MDS970S-10 27,2 971  10 145 QSL8.9 5300 4200 2100 2630 5280
MDS1011S-8.6 28,three 1011  8,six 124,seven QSL8.9 5300 4200 2100 2630 5280
MDS1054S-twelve 29,five 1054  12 174 QSL8.9 5300 4200 2100 2630 5280
MDS1250S-8.6 35 1250  eight,six 124,7 QSL8.9 5300 4200 2100 2630 5280
MDS1400S-13 forty 1400 13 188,five QSZ13 6200 4700 2100 2630 5800
MDS1600S-10.3 45 1600 ten,3 149,35 QSZ13 6200 4700 2100 2630 5800
MDS1785S-thirteen 50 1785 13 188,five QSZ13 6200 4700 2100 2630 5800
MDS2140S-ten sixty 2142 10 one hundred forty five QSZ14 7400 5400 2230 2630 8400
 
Big Series    (Medium&High strain)
Large Series    (Medium&High force) FAD Pressure Engine design Dimensional Day(mm)
m3/min cfm Bar psig length width height weight(kg)
product with tow bar without tow bar
MDS900S-20 25,three 904  twenty 290 QSM11 5300 4200 2100 2630 5800
MDS960S-18 26,9 961  18 261 QSM11 5300 4200 2100 2630 5800
MDS1000S-35 28,two 1000 35 507,five QSZ13 6200 4700 2100 2630 7200
MDS1089S-twenty five thirty,5 1089  25 362,5 QSZ13 6200 4700 2100 2630 7200
MDS1200S-24 33,6 1200  24 348 QSZ13 6200 4700 2100 2630 7200
MDS1250S-21 35 1250  21 304,five QSZ13 6200 4700 2100 2630 7200
MDS1250S-twenty five 35 1250  twenty five 362,5 QSZ13 6200 4700 2100 2630 7200
MDS1250S-30 35 1250 30 435 WP17G770E302 6200 4700 2100 2630 7800
MDS1250S-35 35 1250 35 507,5 WP17G770E302 6200 4700 2100 2630 7800
MDS1250S-40 35 1250 40 580 WP17G770E302 6200 4700 2100 2630 7800
MDS1428S-18 forty 1428 eighteen 261 QSZ13 6200 4700 2100 2630 7200
MDS1428S-35 forty 1428 35 507,5 TAD1643VE-B 7400 5500 2180 2650 10000
MDS1428S-forty forty 1428 forty 580 QSK19 7400 5500 2180 2650 10000
MDS1600S-25 44,eight 1600 25 362,5 WP17G770E302 7400 5500 2180 2650 ten thousand

 

GTL Air compressor check system

 

After-sales Service: Online
Warranty: 1year
Lubrication Style: Lubricated
Cooling System: Water Cooling
Power Source: Diesel Engine
Cylinder Position: Vertical

###

Customization:

###

Model  MDS185-FF
Compressor Air
delivery
m3/min
5.18
cu.ft/min   185
Discharge pressure bar 7
psig 101.5
Lubricating Oil Capacity
L 23
Diesel
Engine
Manufacture&Model
Foxair4027DF-005
Cylinder Number 4
Rotation speed(Rmp) Operating 2650
Idle speed(r/min) 2200
Rated power(KW)
42
Lubricating Oil capacity(L) 300
Displacement (L)
2.7
Lubricating Oil Capacity (L)
7
Coolant Capacity (L)
9
Battery
6-QW-70

###

Standard Configuration

###

General Features

###

Structure diagram

###

Feature&Benefit
Feature   Benefit
Pressure selection and control Easy pressure setting
Flow selection and control The working pressure and airflow rate can be adjusted according to the size of air consumption without wasting any diesel
The twin-screw rotor is directly connected with the diesel engine by a highly flexible coupling Outputting more air with less energy consumption, featuring high reliability, longer service life, and low maintenance cost.
The two-stage air filtration system The total efficiency of air filtration reaches 99.8% ensuring the compressor to not be infringed by dust and dirt particles and longer service life of the engine
High-temperature resistance design Able to run for a long time under extreme cold or hot temperature from -20ºC to 50ºC
One-button start, clear operational parameters Operators don’t have to go through long-term professional training, and unattended operations can be achieved.

###

Application areas

###

Field Application Nominal Working Pressure(bar) Free Air Delivery Range(m3/min)
General Construction
(building sites, road maintenance, bridges, tunnels, concrete pumping and shotcreting)
Hand-held pneumatic breakers 7~14 5~13
Jack hammers
Air guns
Shotcrete equipment
Pneumatic wrenches
Nut runners
Ground Engineering Drilling 
(basement and foundation excavation for apartment blocks and other buildings)
Pneumatic rock drills 7~17 12~28
Block cutters
Dewatering pumps.
Hand-held pneumatic breakers
Utility, Abrasive Blasting
(shipyards, steel construction and large renovation jobs)
Sandblasting
(remove rust, scale, paint)
7~10 10~22
Blast Hole Drilling
(aggregate production for construction stabilization, cement production in limestone quarries and open pit mining)
Rock drills 14~21 12~29
Dewatering pumps
Hand-held breakers
High Pressure Drilling
(drilling for water wells and foundations for high-rise buildings, along with geotechnical/geothermal applications)
Water well drilling 20~35 18~40
 DTH drilling
Rotary drilling

###

Selection table

###

Small Series
Small Series FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS55S-7 1,55 55  7 101,5  D902 2925 1650 1200 1200 600
MDS80S-7 2,24 80  7 101,5 D1005 2925 1650 1200 1200 630
MDS100S-7 2,8 100  7 101,5 V1505 2925 1650 1200 1200 640
MDS125S-7 3,5 125  7 101,5 V1505 3065 1800 1500 1350 810
MDS130S-8 3,7 132  8 116 JE493 3065 1800 1500 1350 810
MDS185S-7 5,18 185  7 101,5 JE493 3200 1900 1740 1660 950
MDS185S-10 5,18 185  10 145 JE493 3050 1900 1740 1660 950
 
Middle Series  (Low&Medium pressure)
Middle Series  (Low&Medium pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS265S-7 7,42 265  7 101,5 JE493 3629 2200 1700 1470 1200
MDS300S-14 8,4 300  14 203 4BTA3.9 3850 2600 1810 2378 1800
MDS350S-10 9,9 354  10 145 4BT3.9 3850 2600 1810 2378 1800
MDS390S-7 11 393  7 101,5 4BTA3.9 3850 2600 1810 2378 1800
MDS390S-13 11 393  13 188,5 QSB4.5 3850 3100 1810 2378 1980
MDS429S-7 12 429  7 101,5 4BTA3.9 3850 2600 1810 2378 1800
MDS429S-14 12 429  14 203 QSB4.5 3850 3100 1810 2378 1980
MDS500S-14 14,1 504  14 203 6BTAA5.9 4550 3600 1810 2378 3100
MDS690S-14 19,3 689  14 203 QSB6.7 4950 3300 2170 2620 3500
MDS720S-10 20,2 721  10 145 QSB6.7 4950 3300 2170 2620 3500
MDS750S-12 21 750  12 174 QSB6.7 4950 3300 2170 2620 3500
MDS786S-10.3 22 786  10,3 149,35 QSB6.7 4950 3300 2170 2620 3500
MDS820S-14 23 821  14 203 6LTAA8.9 5300 4200 2170 2630 5200
MDS850S-8.6 24 857  8,6 124,7 6CTAA8.3 5300 4200 2170 2630 4600
MDS900S-7.1 25,3 904  7,1 102,95 6CTA8.3 5300 4200 2170 2630 4600
 
Middle Series (Medium&High pressure)
Middle Series (Medium&High pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS460S-17 13 464  17 246,5 6BTAA5.9 4600 3500 1800 2230 3500
MDS620S-17 17,4 621  17 246,5 6LTAA8.9 5300 4200 2170 2630 5200
MDS650S-19 18,2 650  19 275,5 QSL8.9 5300 4200 2170 2630 5200
MDS690S-20.4 19,4 693  20,4 295,8 6LTAA8.9 5300 4200 2170 2630 5200
MDS770S-21 21,6 771  21 304,5 6LTAA8.9 5300 4200 2100 2630 5280
MDS830S-18 23,2 830  18 261 6LTAA8.9 5300 4200 2100 2630 5280
MDS820S-25 23 821  25 362,5 QSM11 5300 4200 2100 2630 5600
MDS860S-20.4/17.3 24,2 864  20,4 295,8 QSL8.9 5300 4200 2100 2630 5280
24,2 864  17,3 250,85
MDS875S-23 24,5 875  23 333,5 QSM11 5300 4200 2100 2630 5600
 
Large Series    (Low&Medium pressure)
Large Series    (Low&Medium pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS900S-14.2/10.5 25,1 896  14,2 205,9 6LTAA8.9 5300 4200 2100 2630 5280
25,2 900  10,5 152,25
MDS910S-14 25,6 914  14 203 6LTAA8.9 5300 4200 2100 2630 5280
MDS970S-10 27,2 971  10 145 QSL8.9 5300 4200 2100 2630 5280
MDS1011S-8.6 28,3 1011  8,6 124,7 QSL8.9 5300 4200 2100 2630 5280
MDS1054S-12 29,5 1054  12 174 QSL8.9 5300 4200 2100 2630 5280
MDS1250S-8.6 35 1250  8,6 124,7 QSL8.9 5300 4200 2100 2630 5280
MDS1400S-13 40 1400 13 188,5 QSZ13 6200 4700 2100 2630 5800
MDS1600S-10.3 45 1600 10,3 149,35 QSZ13 6200 4700 2100 2630 5800
MDS1785S-13 50 1785 13 188,5 QSZ13 6200 4700 2100 2630 5800
MDS2140S-10 60 2142 10 145 QSZ14 7400 5400 2230 2630 8400
 
Large Series    (Medium&High pressure)
Large Series    (Medium&High pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS900S-20 25,3 904  20 290 QSM11 5300 4200 2100 2630 5800
MDS960S-18 26,9 961  18 261 QSM11 5300 4200 2100 2630 5800
MDS1000S-35 28,2 1000 35 507,5 QSZ13 6200 4700 2100 2630 7200
MDS1089S-25 30,5 1089  25 362,5 QSZ13 6200 4700 2100 2630 7200
MDS1200S-24 33,6 1200  24 348 QSZ13 6200 4700 2100 2630 7200
MDS1250S-21 35 1250  21 304,5 QSZ13 6200 4700 2100 2630 7200
MDS1250S-25 35 1250  25 362,5 QSZ13 6200 4700 2100 2630 7200
MDS1250S-30 35 1250 30 435 WP17G770E302 6200 4700 2100 2630 7800
MDS1250S-35 35 1250 35 507,5 WP17G770E302 6200 4700 2100 2630 7800
MDS1250S-40 35 1250 40 580 WP17G770E302 6200 4700 2100 2630 7800
MDS1428S-18 40 1428 18 261 QSZ13 6200 4700 2100 2630 7200
MDS1428S-35 40 1428 35 507,5 TAD1643VE-B 7400 5500 2180 2650 10000
MDS1428S-40 40 1428 40 580 QSK19 7400 5500 2180 2650 10000
MDS1600S-25 44,8 1600 25 362,5 WP17G770E302 7400 5500 2180 2650 10000

###

GTL Air compressor test system
After-sales Service: Online
Warranty: 1year
Lubrication Style: Lubricated
Cooling System: Water Cooling
Power Source: Diesel Engine
Cylinder Position: Vertical

###

Customization:

###

Model  MDS185-FF
Compressor Air
delivery
m3/min
5.18
cu.ft/min   185
Discharge pressure bar 7
psig 101.5
Lubricating Oil Capacity
L 23
Diesel
Engine
Manufacture&Model
Foxair4027DF-005
Cylinder Number 4
Rotation speed(Rmp) Operating 2650
Idle speed(r/min) 2200
Rated power(KW)
42
Lubricating Oil capacity(L) 300
Displacement (L)
2.7
Lubricating Oil Capacity (L)
7
Coolant Capacity (L)
9
Battery
6-QW-70

###

Standard Configuration

###

General Features

###

Structure diagram

###

Feature&Benefit
Feature   Benefit
Pressure selection and control Easy pressure setting
Flow selection and control The working pressure and airflow rate can be adjusted according to the size of air consumption without wasting any diesel
The twin-screw rotor is directly connected with the diesel engine by a highly flexible coupling Outputting more air with less energy consumption, featuring high reliability, longer service life, and low maintenance cost.
The two-stage air filtration system The total efficiency of air filtration reaches 99.8% ensuring the compressor to not be infringed by dust and dirt particles and longer service life of the engine
High-temperature resistance design Able to run for a long time under extreme cold or hot temperature from -20ºC to 50ºC
One-button start, clear operational parameters Operators don’t have to go through long-term professional training, and unattended operations can be achieved.

###

Application areas

###

Field Application Nominal Working Pressure(bar) Free Air Delivery Range(m3/min)
General Construction
(building sites, road maintenance, bridges, tunnels, concrete pumping and shotcreting)
Hand-held pneumatic breakers 7~14 5~13
Jack hammers
Air guns
Shotcrete equipment
Pneumatic wrenches
Nut runners
Ground Engineering Drilling 
(basement and foundation excavation for apartment blocks and other buildings)
Pneumatic rock drills 7~17 12~28
Block cutters
Dewatering pumps.
Hand-held pneumatic breakers
Utility, Abrasive Blasting
(shipyards, steel construction and large renovation jobs)
Sandblasting
(remove rust, scale, paint)
7~10 10~22
Blast Hole Drilling
(aggregate production for construction stabilization, cement production in limestone quarries and open pit mining)
Rock drills 14~21 12~29
Dewatering pumps
Hand-held breakers
High Pressure Drilling
(drilling for water wells and foundations for high-rise buildings, along with geotechnical/geothermal applications)
Water well drilling 20~35 18~40
 DTH drilling
Rotary drilling

###

Selection table

###

Small Series
Small Series FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS55S-7 1,55 55  7 101,5  D902 2925 1650 1200 1200 600
MDS80S-7 2,24 80  7 101,5 D1005 2925 1650 1200 1200 630
MDS100S-7 2,8 100  7 101,5 V1505 2925 1650 1200 1200 640
MDS125S-7 3,5 125  7 101,5 V1505 3065 1800 1500 1350 810
MDS130S-8 3,7 132  8 116 JE493 3065 1800 1500 1350 810
MDS185S-7 5,18 185  7 101,5 JE493 3200 1900 1740 1660 950
MDS185S-10 5,18 185  10 145 JE493 3050 1900 1740 1660 950
 
Middle Series  (Low&Medium pressure)
Middle Series  (Low&Medium pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS265S-7 7,42 265  7 101,5 JE493 3629 2200 1700 1470 1200
MDS300S-14 8,4 300  14 203 4BTA3.9 3850 2600 1810 2378 1800
MDS350S-10 9,9 354  10 145 4BT3.9 3850 2600 1810 2378 1800
MDS390S-7 11 393  7 101,5 4BTA3.9 3850 2600 1810 2378 1800
MDS390S-13 11 393  13 188,5 QSB4.5 3850 3100 1810 2378 1980
MDS429S-7 12 429  7 101,5 4BTA3.9 3850 2600 1810 2378 1800
MDS429S-14 12 429  14 203 QSB4.5 3850 3100 1810 2378 1980
MDS500S-14 14,1 504  14 203 6BTAA5.9 4550 3600 1810 2378 3100
MDS690S-14 19,3 689  14 203 QSB6.7 4950 3300 2170 2620 3500
MDS720S-10 20,2 721  10 145 QSB6.7 4950 3300 2170 2620 3500
MDS750S-12 21 750  12 174 QSB6.7 4950 3300 2170 2620 3500
MDS786S-10.3 22 786  10,3 149,35 QSB6.7 4950 3300 2170 2620 3500
MDS820S-14 23 821  14 203 6LTAA8.9 5300 4200 2170 2630 5200
MDS850S-8.6 24 857  8,6 124,7 6CTAA8.3 5300 4200 2170 2630 4600
MDS900S-7.1 25,3 904  7,1 102,95 6CTA8.3 5300 4200 2170 2630 4600
 
Middle Series (Medium&High pressure)
Middle Series (Medium&High pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS460S-17 13 464  17 246,5 6BTAA5.9 4600 3500 1800 2230 3500
MDS620S-17 17,4 621  17 246,5 6LTAA8.9 5300 4200 2170 2630 5200
MDS650S-19 18,2 650  19 275,5 QSL8.9 5300 4200 2170 2630 5200
MDS690S-20.4 19,4 693  20,4 295,8 6LTAA8.9 5300 4200 2170 2630 5200
MDS770S-21 21,6 771  21 304,5 6LTAA8.9 5300 4200 2100 2630 5280
MDS830S-18 23,2 830  18 261 6LTAA8.9 5300 4200 2100 2630 5280
MDS820S-25 23 821  25 362,5 QSM11 5300 4200 2100 2630 5600
MDS860S-20.4/17.3 24,2 864  20,4 295,8 QSL8.9 5300 4200 2100 2630 5280
24,2 864  17,3 250,85
MDS875S-23 24,5 875  23 333,5 QSM11 5300 4200 2100 2630 5600
 
Large Series    (Low&Medium pressure)
Large Series    (Low&Medium pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS900S-14.2/10.5 25,1 896  14,2 205,9 6LTAA8.9 5300 4200 2100 2630 5280
25,2 900  10,5 152,25
MDS910S-14 25,6 914  14 203 6LTAA8.9 5300 4200 2100 2630 5280
MDS970S-10 27,2 971  10 145 QSL8.9 5300 4200 2100 2630 5280
MDS1011S-8.6 28,3 1011  8,6 124,7 QSL8.9 5300 4200 2100 2630 5280
MDS1054S-12 29,5 1054  12 174 QSL8.9 5300 4200 2100 2630 5280
MDS1250S-8.6 35 1250  8,6 124,7 QSL8.9 5300 4200 2100 2630 5280
MDS1400S-13 40 1400 13 188,5 QSZ13 6200 4700 2100 2630 5800
MDS1600S-10.3 45 1600 10,3 149,35 QSZ13 6200 4700 2100 2630 5800
MDS1785S-13 50 1785 13 188,5 QSZ13 6200 4700 2100 2630 5800
MDS2140S-10 60 2142 10 145 QSZ14 7400 5400 2230 2630 8400
 
Large Series    (Medium&High pressure)
Large Series    (Medium&High pressure) FAD Pressure Engine model Dimensional Date(mm)
m3/min cfm Bar psig length width height weight(kg)
model with tow bar without tow bar
MDS900S-20 25,3 904  20 290 QSM11 5300 4200 2100 2630 5800
MDS960S-18 26,9 961  18 261 QSM11 5300 4200 2100 2630 5800
MDS1000S-35 28,2 1000 35 507,5 QSZ13 6200 4700 2100 2630 7200
MDS1089S-25 30,5 1089  25 362,5 QSZ13 6200 4700 2100 2630 7200
MDS1200S-24 33,6 1200  24 348 QSZ13 6200 4700 2100 2630 7200
MDS1250S-21 35 1250  21 304,5 QSZ13 6200 4700 2100 2630 7200
MDS1250S-25 35 1250  25 362,5 QSZ13 6200 4700 2100 2630 7200
MDS1250S-30 35 1250 30 435 WP17G770E302 6200 4700 2100 2630 7800
MDS1250S-35 35 1250 35 507,5 WP17G770E302 6200 4700 2100 2630 7800
MDS1250S-40 35 1250 40 580 WP17G770E302 6200 4700 2100 2630 7800
MDS1428S-18 40 1428 18 261 QSZ13 6200 4700 2100 2630 7200
MDS1428S-35 40 1428 35 507,5 TAD1643VE-B 7400 5500 2180 2650 10000
MDS1428S-40 40 1428 40 580 QSK19 7400 5500 2180 2650 10000
MDS1600S-25 44,8 1600 25 362,5 WP17G770E302 7400 5500 2180 2650 10000

###

GTL Air compressor test system

what to see in an air compressor

If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.

Pump

If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying one from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
air-compressor

safety equipment

There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these two safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.

CFM Rating

An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in one square inch of air. These two indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
air-compressor

Lack of oil and lubrication

Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
air-compressor

noise level

If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
China High Performance Diesel Engine Vertical Gtl 3330X1750X1640mm China Rotary Air 185cfm Screw Compressor     lowes air compressorChina High Performance Diesel Engine Vertical Gtl 3330X1750X1640mm China Rotary Air 185cfm Screw Compressor     lowes air compressor
editor by czh 2022-12-31